
Hardwood Flooring Installation and Refinishing Across MD, DC and Northern Virginia
Maybe there's oak under the old carpet, or the floor you have is worn through in the hallway. We install solid and engineered hardwood level and quiet, sand and refinish what's there, and tell you straight when refinishing beats replacing.
Hardwood work we do
We install new floors, refinish old ones and repair boards hurt by water, pets or age, matching the species, width and finish. A lot of the oak under old carpet around here is worth saving.
Solid Hardwood Installation
Oak, maple and other species nailed down over a plywood subfloor above grade. Acclimated in the house before install so it does not gap or cup after the first heating season.
Engineered Hardwood
Real wood over a plywood core, more stable over concrete, in basements and in rooms with wide swings in humidity. Glued, floated or nailed depending on the subfloor.
Sanding and Refinishing
Existing oak sanded flat, stained if you want a colour change and finished with a durable polyurethane. Usually the better value when the boards are sound, and it keeps the original floor.
Board Replacement and Repair
Cupped, stained or rotted boards from a leak, pet damage or an old wall removal cut out and replaced with matching stock, then blended into the finish.
Stair Treads and Risers
Worn treads refinished or replaced, risers painted, nosing matched to the floor above. Stairs take more wear than any room in the house.
Prep, Acclimation and Moisture
Subfloor flattened and fastened, moisture in both the subfloor and the wood checked, and the material allowed to settle in the room before the first board goes down.
Why a wood floor needs a careful installer
- Acclimated, Tested, Then Installed
- Wood sits in the room before install and both the boards and the subfloor get moisture readings. That is what keeps the floor flat through its first year.
- Licensed, Bonded & Insured
- Home Improvement Contractor License No. 420226000078. Liability coverage on every job in MD, DC and VA.
- Written Price Before We Start
- Material, removal, prep, install or refinish, stain and finish coats, and trim on one written number. Species and finish you pick, and we price it plainly.
Hardwood problems we fix
Cupping and Crowning
Boards that curl up at the edges got wet from below: a slab, a crawlspace or a leak. The source has to be fixed and the floor dried before sanding, or the floor moves again after the refinish.
Gaps Every Winter
Some seasonal gapping is normal in solid wood. Wide gaps mean the wood was installed too wet or the house runs very dry. Humidity control fixes most of it. Replacement is the answer only for badly shrunk floors.
A Finish Worn Through to Bare Wood
Traffic lanes and kitchens wear the finish off first. Caught early, a screen and recoat restores it. Left too long, the wood itself wears and the floor needs a full sand.
What people ask about hardwood
That you are sold new floors when a refinish would do.
If the boards are sound and there is enough thickness left to sand, refinishing is usually the better value and keeps the original floor. We tell you which one honestly after looking at it.
That a repaired section will stand out from the rest.
We match species, width and grade, weave the new boards into the existing floor and blend the finish. On a floor that is being refinished anyway, the repair disappears.
That the boards cup or gap after the first winter.
The wood sits in the room before install, and both the boards and the subfloor get moisture readings. That is what keeps the floor flat through its first year.
That they will not show up when they said.
A text confirming the date, the time and the address of the visit arrives as soon as it is booked. Questions in between go to the same number, answered 7:00 AM to 7:00 PM every day.
Wood Floors Through a DC Year
Some seasonal movement is normal in solid wood. Washington summers are hot and humid, with July highs around 89 to 90 degrees, and the house dries out once the heat comes on after the first freeze, which averages around November 12. Wide winter gaps usually mean the wood went in too wet or the house runs very dry. See what to do when a wood floor gets wet.
Get a Free Hardwood Flooring Quote
- Free estimate, online or on site
Or call us directly:
(240) 695-4415Tell Us About the Hardwood Flooring Job
We take insurance jobs. Financing may also be available for qualifying projects. See financing options.
How a Hardwood Flooring Job Runs
- 1Tell us whether you want new wood installed or the existing floor refinished, with photos of the floor you have.
- 2We check moisture in the subfloor and the wood, and tell you whether refinishing or replacement is the better job.
- 3The price covers removal or sanding, material, stain, finish coats and trim.
- 4New wood acclimates in the room first. Refinished floors are sanded flat, stained if you choose, and coated.
- 5We reinstall trim, clean up and walk the finished floor with you once the finish has cured.
