Skip to main content

Homeowner Guide

Burst Pipe or Major Leak: What to Do Before the Plumber Arrives

Published March 2026 by All Purpose Anytime Services LLC

Water is coming through the ceiling and the plumber is still on the way. What you do in the next few minutes decides how much has to be torn out later, so here's the order we'd do it in.

Step 1: Shut Off the Water

Find your main water shut-off valve and turn it off immediately. In most DMV homes, it's in the basement near the front foundation wall, or near the water meter. Show everyone in the house where it is now, before they need it.

Step 2: Turn Off the Water Heater

With the main water off, turn off your water heater to prevent damage. For gas heaters, turn the gas valve to the off position. For electric, flip the breaker. Running a water heater without water supply can cause overheating.

Step 3: Open Faucets to Drain

Open cold water faucets throughout the house to drain remaining water from the pipes. This reduces pressure and minimizes additional leaking. Flush toilets once to empty the tanks.

Step 4: Contain the Water

Use towels, buckets, and mops to contain standing water. If water is near electrical outlets or your breaker panel, turn off electricity to those areas first. Move furniture and valuables away from the affected area.

Step 5: Document Everything

Take photos and videos of the damage before cleanup. Your insurance company will need this documentation. Note the time the leak started and what you did to mitigate it.

Step 6: Call a Plumber

Call a plumber to repair the pipe. We also handle the drywall repair and repainting after the plumbing is fixed.

Do Not:

  • Use chemical drain cleaners on a burst pipe
  • Attempt to solder or repair pipes yourself during active flooding
  • Ignore a small leak thinking it will stop on its own
  • Touch electrical equipment while standing in water

Need the Damage Repaired?

Once the pipe is fixed and the room is dry, we rebuild what the water took. We answer every day from 7am to 7pm.